Removing an expresscard – HP EliteBook 8740w Mobile Workstation User Manual

Page 98

Pull the insert out of the slot (2).

To insert an ExpressCard:

Hold the card label-side up, with the connectors facing the computer.

Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated.

You will hear a sound when the device has been detected, and a menu of options may be displayed.

NOTE:

The first time you insert an ExpressCard, a message is displayed in the notification area

to let you know the device is recognized by the computer.

NOTE:

An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an

ExpressCard when it is not in use.

Removing an ExpressCard

CAUTION:

To prevent loss of information or an unresponsive system, use the following procedure to

safely remove the ExpressCard.

Save your information and close all programs associated with the ExpressCard.

NOTE:

To stop a data transfer, click Cancel in the operating system Copying window.

Chapter 8 External media cards