HP Access Control - Manual (Page 10)

4 Change PIN
4.1 How to change a PIN
This section explains how to change a PIN (personal identification number).
4.2 Login
1. Open a web browser and enter the following in the address field:
http://servername/hpac
Where servername is the name or IP address of the server containing the installation of HP Access
Control Web Interface Configurator.
2. If prompted, enter credentials.
3. Click Login.
4. Click the Setup icon.
Figure 4-1 Home screen
4.3 Change settings
1. Click the Change PIN tab.
Figure 4-2 Change PIN tab
2. Enter the old PIN in the Old PIN field.
3. Enter the new PIN in the New PIN field.
4 Chapter 4 Change PIN