Substrate settings, Download media presets, Add a new substrate – HP Latex 210 Printer User Manual
Page 63: 5 substrate settings
5 Substrate settings
Download media presets
Each supported substrate has its own characteristics. The printer changes the way it prints on each
different substrate. The RIP requires a description of the requirements of each substrate. This description
is called the “media preset”.
The media preset contains the ICC color profile, which describes the color characteristics of the
substrate. It also contains information about other characteristics (RIP and printer settings) and
requirements of the substrate that are not directly related to color. Media presets for your printer are
installed in the RIP.
The RIP contains media presets for only the most commonly used substrates. If you buy a substrate for
which your RIP has no preset, you can obtain a preset for a new substrate in the following ways:
●
Try to download the media preset from the substrate manufacturer's Web site.
●
If it is not there, try to download it from the RIP company's Web site.
●
If it is not there, check availability using the HP Media Finder search application located at
●
If you cannot find it anywhere, create a new media preset in the RIP. See
.
●
Further information can be found at
Add a new substrate
This section is provided in case you decide to make your own media preset. Normally there is no need
to do this if you can find ready-made presets for all the substrates that you use.
ENWW
Download media presets
59
Substrate settings