HP Latex 210 Printer - Manual (Page 5)

1 Introduction
Safety precautions
Before using your printer, read the following safety precautions to make sure you use the equipment
safely.
You are expected to have the appropriate technical training and experience necessary to be aware of
hazards to which you may be exposed in performing a task, and take appropriate measures to
minimize the risks to yourself and to other people.
General safety guidelines
● Refer to the installation instructions before connecting the printer to the supply.
● There are no operator-serviceable parts inside the printer except those covered by HP's Customer
Self Repair program (see http://www.hp.com/go/selfrepair/ ). Refer servicing of other parts to
qualified service personnel.
● Turn off the printer, unplug both power cords from the power outlets, and call your service
representative in any of the following cases.
◦ The power cord or plug is damaged.
◦ Liquid has entered the printer.
◦ There is smoke or an unusual smell coming from the printer.
◦ The printer has been dropped or the drying or curing module damaged.
◦ The printer's built-in Residual Current Circuit Breaker (Ground Fault Circuit Interrupter) has
been repeatedly tripped.
◦ The printer is not operating normally.
● Turn off the printer and unplug both power cords from the power outlets in either of the following
cases.
◦ During a thunderstorm
◦ During a power failure
Electrical shock hazard
WARNING! The drying and curing modules operate at hazardous voltages capable of causing
death or serious personal injury.
ENWW Safety precautions 1
In
tr
od
u
ctio
n