The loading accessory, Ile material, see, Ile material see – HP Latex 210 Printer User Manual
Page 54
The following picture shows an edge holder correctly placed.
NOTE:
When you use the edge holders, your prints should have a minimum margin of 10 mm.
The loading accessory
The loading accessory is designed to help in loading flimsy substrates. It is recommended when loading
such substrates, but not obligatory.
NOTE:
The edge holders can be used whether or not you decide not to use the loading accessory.
1.
Select Load with accessory from the Substrate Load menu on the front panel.
NOTE:
If you select Load with accessory, a message is displayed asking whether you want
to use the edge holders.
50
Chapter 4 Handle the substrate
ENWW
Handle the substrate
This manual is related to the following products: