HP Latex 210 Printer - Manual (Page 15)

Main tab
The Main tab provides information about the following items.
● Substrate, ink, printhead and maintenance status
● Temperatures of the drying and curing modules
● Substrate and ink usage and accounting
Setup tab
The Setup tab enables you to complete these tasks.
● Specify printer settings such as units of measurement and refresh date
● Specify network and security settings
● Set the date and time
● Update firmware
● Align printheads
● Upload media presets
Support tab
The Support tab offers various kinds of help with your printer.
● Browse helpful information from a variety of sources
● Troubleshoot problems
● Access HP Designjet links for technical support with your printer and accessories
● Access service support pages that show current and historical data on the usage of your printer
Turn the printer on and off
To turn on the printer, ensure that the power switch at the rear of the printer is turned on, ensure that the
residual current circuit breakers are in the up position, then press the Power button on the front panel.
You can leave the printer on without wasting energy. Leaving it on improves response time. When the
printer has not been used for a certain period of time, it saves power by going into sleep mode. Any
interaction with the printer returns it to active mode, and it can resume printing immediately.
If you want to turn the printer on or off, the normal and recommended method is to use the Power
button on the front panel.
ENWW Turn the printer on and off 11
In
tr
od
u
ctio
n