HP Latex 210 Printer - Manual (Page 61)

Substrate length tracking
The substrate length tracking feature enables you to keep track of how much substrate you have used
and how much is remaining on the roll.
1. When the roll is first loaded onto the printer you have the option to enter the length of substrate on
the roll. The amount of substrate that is subsequently used is then tracked.
2. When the substrate is being unloaded, the front panel will display the amount remaining so that
you can note it for future reference.
3. Next time the substrate is loaded, you can enter the remaining length, and the printer will again
track the substrate as it is used. If the substrate was never actually unloaded, for example if there
was a substrate jam and the substrate was unloaded and the printer was turned off and on, if you
select Last known length the printer will apply the values from when the jam occurred (if the
tracking feature was enabled).
The remaining length of substrate is always displayed in the Substrate area of the front panel. This
information may also be displayed in your RIP.
ENWW Substrate length tracking 57
Handle the substrate