HP PSC 1315 All-in-One Printer - Manual (Page 9)

1
1
quic
k star
t
quick start
Your HP psc can be used for making copies and printing photos from a
PictBridge-compliant camera without turning on your computer. You can do more
with your HP psc by using the HP Director software that you installed on your
computer during the initial setup. The HP Director includes troubleshooting tips,
product-specific help, and enhanced copy, scan, and photo functionality. For
more information on the use of the
HP Director, see use your hp psc with a
computer on page 6.
This section contains the following topics:
• front panel overview on page 1
• PictBridge camera port overview on page 3
• front panel status lights on page 3
• use your hp psc with a computer on page 6
front panel overview
Use the graphic and table below to become familiar with the front panel features
of your HP psc.
Note: The front panel cover must be attached to the HP psc by removing the
adhesive backing and placing the cover in the appropriate location. The
HP psc will not operate unless the front panel cover is attached properly. If
your HP psc is not operating properly, refer to the setup instructions for
information about attaching the front panel cover.