HP PSC 1315 All-in-One Printer - Manual (Page 10)

hp psc 1310 series
chapter 1
2
quic
k star
t
feature purpose
1 On/Resume : turns the HP psc on and off. Also, resumes a copy
or print job after a jam or other error. If the HP psc is in an error
state, you can turn it off by pressing On/Resume for 3 seconds.
Warning! When the HP psc is off, a minimal amount of
power is still supplied to the device. Unplug the power cord
to completely disconnect the power supply to the HP psc.
2 Check Paper : lights up to indicate the need to load paper or
remove a paper jam.
3 Check Print Cartridge : lights up to indicate the need to reinsert
or replace the print cartridge or close the print carriage access
door.
4 Cancel : stops a job or exits button settings.
5 Copies (1-9) : changes the number of copies for a copy job.
6 Size : changes the copy image size to either 100% or Fit to Page.
7 Paper Type : changes the paper type to Plain or Photo.
8 Start Copy , Black : starts a black-and-white copy.
9 Start Copy , Color : starts a color copy.
10 Scan : starts a scan of an original from the glass.
1
2
3
4
6
8
9
10
5
7