Change memory card default settings – HP Color LaserJet CP1515n Printer User Manual
Page 72
Change memory card default settings
The HP Color LaserJet CP1518ni product comes with default settings that you can change for photo
printing from the product control panel.
NOTE:
The default settings remain as selected until you change and save them again. If you want to
change the settings temporarily for a particular photo-printing job, see
Print photos directly from the
.
1.
Press
OK
.
2.
Use the
Left arrow
( ) or
Right arrow
( ) button to select Main menu Photo setup, and then
press
OK
.
3.
Use the
Left arrow
( ) or
Right arrow
( ) button to select one of the following menu items, and
then press
OK
.
●
Def. light/dark: Change the light and dark setting for the image that you are printing.
●
Def. # of copies: Change the number of copies that you want to print.
●
Def. output color: Set whether you are printing in color or black and white.
●
Restore defaults: This returns all settings to the factory defaults.
4.
Use the
Left arrow
( ) or
Right arrow
( ) button to change the setting, and then press
OK
to save
the change or, press
X
to exit the menu without saving changes.
5.
Repeat these steps for each menu item that you want to change.
62
Chapter 8 Photo
ENWW