HP Color LaserJet CP1515n Printer - Manual (Page 59)

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu item Description
Restore defaults Sets all customized settings to the factory default values.
PowerSave Sets how long the product remains idle before it enters PowerSave mode. The
product automatically exits PowerSave mode when you send a print job or press a
control-panel button.
The default setting is 15 minutes.
Cleaning mode Use this option to clean the product if you see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the product prompts you to load plain paper in tray 1 and
then press
OK to start the cleaning process. Wait until the process is complete.
Discard the page that prints.
USB speed Sets the USB speed to High or Full. For the product to actually operate at high
speed, it must have high speed enabled and be connected to an EHCI host controller
that is also operating at high speed. This menu item also does not reflect the current
operating speed of the product.
The default setting is High.
Less paper curl If printed pages are consistently curled, use this option to set the product to a mode
that reduces curl.
The default setting is Off.
Archive print If you are printing pages that will be stored for a long time, use this option to set the
product to a mode that reduces toner smearing and dusting.
The default setting is Off.
ENWW Use the control-panel menus 49