HP ProLiant DL580 G7 Server - Manual (Page 70)

Hardware options installation 70
8. Connect the cable.
9. Install the capacitor pack.
10. Install the SPI board.
11. Install the access panel.
12. Slide the server back into the rack.
13. Power up the server (on page 25 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 71 ).
2. Retaining the recovery key/password (on page 71 ).
3. Enabling the Trusted Platform Module (on page 73 ).
Enabling the TPM requires accessing RBSU (" HP ROM-Based Setup Utility " on page 75 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).