HP ProLiant DL580 G7 Server - Manual (Page 56)

Hardware options installation 56
4. Connect the power cord to the power source.
5. Be sure that the power supply LED is green (" Power supply LED " on page 12 ).
6. Be sure that the front panel external health LED is green (" Front panel LEDs and buttons " on page 8 ).
Internal solid state drive expansion bay option
1. Power down the server (on page 25 ).
2. Extend the server from the rack (on page 25 ).
3. Remove the access panel (on page 26 ).
4. Remove the SPI board (on page 29 ).
5. Install the solid state drive.
6. Connect the cable.
The cable and the cable arrangement might appear differently from shown.