HP ProLiant DL580 G7 Server - Manual (Page 27)

Operations 27
2. Extend the server from the rack (on page 25 ).
3. Open the locking latch, slide the access panel to the rear of the chassis, and remove the access panel.
If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch.
Processor memory drawer shipping screw locations
Two orange shipping screws secure the processor memory drawer in place during shipping. You must
remove the screws to access the processor memory drawer. Retain the screws for future use.
Remove the processor memory drawer
1. Power down the server (on page 25 ).
2. Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
("
Processor memory drawer shipping screw locations " on page 27 ).