HP XP Racks - Manual (Page 30)

Table 14 SNMP failure trap reference codes (continued)
Alert level Section Description Trap reference code
SIM13 SIM23 SIM22
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Simplex to Duplex Pending) xx 0x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Simplex to Duplex) xx 1x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex Pending to Duplex) xx 2x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex Pending to Suspend) xx 3x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex to Suspend) xx 4x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex to Simplex) xx 5x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex Pending to Simplex) xx 6x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Suspend to Simplex) xx 7x D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Suspend to Duplex Pending) xx 8x D9
SERVICE Failure with paired
volumes A change to an S-VOL was receiver from the MCU
(HOLD -> PAIR) xx 9x D9
SERVICE Failure with paired
volumes A change to an S-VOL was receiver from the MCU
(HOLD -> COPY) xx Ax D9
SERVICE Failure with paired
volumes A change to an S-VOL was receiver from the MCU
(HOLD -> SMPL) xx Bx D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Simplex to Suspend) xx Cx D9
SERVICE Failure with paired
volumes A change to an S-VOL was receiver from the MCU (SMPL
-> HOLD) xx Dx D9
SERVICE Failure with paired
volumes A change to an S-VOL was receiver from the MCU
(PSUx(Suspend) -> HOLD) xx Ex D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the MCU
(From Duplex to Duplex Pending) xx Fx D9
SERVICE Failure with paired
volumes A change to an S-VOL was received from the RCU (A
request for suspension was received.) xx 0x DA
SERVICE Failure with paired
volumes A change to an S-VOL was received from the RCU (A
suspension transaction was completed.) xx 1x DA
SERVICE Failure with paired
volumes A change to an S-VOL was received from the RCU (An
instruction to delete a pair was received in the Suspend
status.) xx 2x DA
SERVICE Failure with paired
volumes A change to an S-VOL was received from the RCU (An
instruction to delete a pair was received in the Duplex
Pending status.) xx 3x DA
SERVICE Failure with paired
volumes A change to an S-VOL was received from the RCU (An
instruction to delete a pair was received in the Duplex
status.) xx 4x DA
30 SNMP failure trap reference