HP XP P9500 Storage - Manual (Page 99)

Corresponding command Description Operation type
raidcom unlock resource -resource_name > Unlock resource.
raidcom get resource Display resource group
information.
raidcom add resource -resource_name
[-resource_id |-ldev_id | -port Add resource group.
| -port | -parity_grp_id
| -external_grp_id ]
raidcom delete resource -resource_name
[-ldev_id | -port | -port Delete resource group.
name> | -parity_grp_id | -external_grp_id
]
raidcom add host_grp -port -host_grp_name name> Create host group. Host
(see the Provisioning Guide
for the storage system)
raidcom modify host_grp -port []
-host_mode < host mode> [-host_mode_opt
… ] Set host mode.
raidcom add hba_wwn -port []
-hba_wwn Register a host to host group.
raidcom delete host_grp -port [] Delete host group.
raidcom get host_grp -port [] Display host group information.
raidcom modify port -port {[-port_speed ]
[-loop_id] [-topology ] [-security_switch < y/n
>]} Set port. Port
(see the Provisioning Guide
for the storage system)
raidcom modify port -port -port_attribute Set port attribute.
raidcom get port [-port ] Display port information.
raidcom add ldev {-parity_grp_id | - external_grp_id
| -pool { | | snap}} Create LDEV. Internal volume
(see the Provisioning Guide
for the storage system)
-ldev_id {-capacity | -offset_capacity |
-cylinder } [-emulation ][-location ]
[-mp_blade_id ]
raidcom get ldev {-ldev_id … [-cnt ] | -grp_opt
-device_grp_name [name>]} [-key ] Display LDEV information.
raidcom get parity_grp [-parity_grp_id ] Display parity group
information.
raidcom add ssid -rcu -ssid Define SSID.
raidcom delete ssid -rcu -ssid
raidcom add thp_pool {{-pool_id [-pool_name naming>] | -pool_name [-pool_id ]} | Create pool for Thin Provisioning
or Thin Provisioning for
Mainframe. Virtual volume
(Thin Provisioning, Thin
Provisioning for
-pool_id -pool_name }} {-ldev_id
…[-cnt] | -grp_opt
Mainframe, Smart Tiers,
Snapshot)
-device_grp_name [name>]}[-user_threshold [] ]
(see the Provisioning Guide
for the storage system)
raidcom add snap_pool {{-pool_id [-pool_name naming>] | -pool_name [-pool_id ]} | Create pool for Snapshot.
-pool_id -pool_name }} {-ldev_id
…[-cnt] | -grp_opt
-device_grp_name [name>]}[-user_threshold <%> ]
Available provisioning operations 99