HP XP P9500 Storage - Manual (Page 199)

Figure 73 Operating SLPR#N by sharing the command device
Continuous Access Synchronous using dual hosts
In the following example, the pair-operation command (except the -l option) determines
whether the operation for paired volumes should be permitted at a remote site. The result is that
the paircreate command is not allowed to operate the paired volume, because the volume
described on HostB differs from the SLPR of the command device. Also, the raidscan -p CL3-A
command (on HostB) is not allowed to scan a port.
Figure 74 Continuous Access Synchronous operation using SLPR
Using RAID Manager SLPR security 199