HP XP P9500 Storage - Manual (Page 9)

Table 1 Available RAID Manager functions on each storage system (continued)
Storage systems Function
P9500 XP24000/XP20000
Disk Array XP12000 Disk
Array XP1024/XP128
Disk Array XP256 Disk
Array
Supported Supported Supported Supported Supported VSS configuration
Supported Supported Supported Supported Supported SRM SRA
Supported Not supported Not supported Not supported Not supported Provisioning (raidcom)
Supported Not supported Not supported Not supported Not supported Out-of-band method
Supported Not supported Not supported Not supported Not supported User authentication
Supported Not supported Not supported Not supported Not supported LDEV nickname
Supported Not supported Not supported Not supported Not supported LDEV group
Supported Not supported Not supported Not supported Not supported Resource group
Supported Not supported Not supported Not supported Not supported Resource lock
* If DKCMAIN Microcode version of the P9500 storage system is 70-03-3x-xx/xx or later, the operation of Continuous
Access Synchronous Z, Continuous Access Journal Z, and Business Copy Z can be performed from RAID Manager.
Read the following program product name as appropriate in this manual. Note that the respective
name of the program product is provided if there is a different explanation.
- When Continuous Access Synchronous is found, read it as Continuous Access Synchronous or
Continuous Access Synchronous Z.
- When Continuous Access Journal is found, read it as Continuous Access Journal or Continuous
Access Journal Z.
- When Business Copy is found, read it as Business Copy or Business Copy Z.
- When Snapshot is found, read it as Fast Snap or Snapshot.
For the supported version of each storage system, contact the HP Technical Support.
Provisioning function
By executing a configuration setting command (raidcom command) from RAID Manager, the
provisioning function such as setting commands or creating LDEVs can be done. For the information
about the configuration setting command (raidcom command), see
(page 96) .
Asynchronous command processing
Within the configuration setting commands (raidcom commands), using asynchronous commands
is a method of command processing applied to a command that takes much time in processing on
the storage system. Once this processing method of command is issued, an additional command
can be executed without having to wait for the command completion that executed just before. It
is also possible to monitor the completion status by using a status reference command.
RAID Manager functions 9