HP EliteBook 8440p - Manual (Page 151)

Select To do this
● Enable/disable Preboot Authentication on HP QuickLook
Boot (enabled by default).
● Enable/disable HP QuickWeb (enabled by default).
● Enable/disable HP QuickWeb Write Protect (disabled by
default).
● Enable/disable Virtualization Technology (select models
only; disabled by default).
● Enable/disable TXT (Intel Trusted Execution Technology)
(select models only; disabled by default).
● Enable/disable Multi Core CPU (enabled by default).
● Enable/disable Intel HT Technology (enabled by
default).
● Enable/disable Wake on USB (enabled by default).
● Enable/disable Num lock state at boot (disabled by
default).
Built-In Device Options ● Enable/disable the wireless button state (enabled by
default).
● Enable/disable embedded WLAN device radio (select
models only; enabled by default).
● Enable/disable the embedded Bluetooth® device radio
(enabled by default).
● Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦ Boot to Network
◦ Follow Boot Order
● Enable/disable the Ambient Light Sensor.
● Enable/disable the Notebook Upgrade Bay device
(enabled by default).
● Enable/disable the fingerprint device (enabled by
default).
● Enable/disable the integrated camera (enabled by
default).
● Enable/disable the Power Monitor Circuit (enabled by
default).
● Enable/disable the audio device (enabled by default).
● Enable/disable a modem device (enabled by default).
Computer Setup menus 139