HP LaserJet 5000 Printer series - Manual (Page 154)

B-8 Control Panel Menus
EN
X DIMENSION=
12.28 INCHES
(110V printers)
or
312 MILLIMETERS
(220V printers)
3.00
to
12.28
INCHES
(110V printers)
or
76
to
312
MILLIMETERS
(220V printers)
This item appears only when
CONFIGURE
CUSTOM PAPER=YES
. Select the
dimension to be fed into the printer.
Y DIMENSION=
18.50 INCHES
(110V printers)
or
470 MILLIMETERS
(220V printers)
5.00
to
18.50
INCHES
(110V printers)
or
127
to
470
MILLIMETERS
(220V printers)
This item appears only when
CONFIGURE
CUSTOM PAPER=YES
. Select the other
dimension.
ORIENTATION=
PORTRAIT
PORTRAIT
LANDSCAPE
Determine the default orientation of print on
the page.
Note
It is best to set the page orientation from the
printer driver or software application.
(Driver and software settings override
control panel settings.)
FORM=60 LINES
(110V printers)
or
64 LINES
(220V printers)
5
to
128
Sets vertical spacing from 5 to 128 lines for
default paper size. Press
[-Value+] once to
change the setting by increments of 1, or
hold down
[-Value+] to scroll by increments
of 10.
PCL FONT SOURCE=
INTERNAL
INTERNAL
SOFT
SLOT 1, 2,
or
3
INTERNAL
: Internal fonts.
SOFT
: Permanent soft fonts.
SLOT 1, 2,
or
3
: Fonts stored in one of
the three DIMM slots.
PCL FONT NUMBER=
0
0
to
999
The printer assigns a number to each font
and lists them on the PCL Font List
(page 103). The font number appears in the
Font # column of the printout.
PCL FONT PITCH=
10.00
0.44
to
99.99
This item might not appear, depending on
the font selected. Press
[-Value+] once to
change setting by increments of .01 for
pitch, or hold down
[-Value+] to scroll by
increments of 1.
Printing Menu (Continued)
Item Values Explanation