HP LaserJet 5000 Printer series - Manual (Page 133)

EN
Specifications A-9
Labels
Caution To avoid damaging the printer, use only labels recommended for
use in laser printers.
If you have problems printing labels, use Tray 1 and open the rear
output bin.
Never print on the same sheet of labels more than once.
Label Construction
When selecting labels, consider the quality of each component:
•
Adhesives: The adhesive material should be stable at 392° F
(200° C), the printer’s maximum temperature.
•
Arrangement: Only use labels with no exposed backing between
them. Labels can peel off sheets with spaces between the labels,
causing serious jams.
•
Curl: Prior to printing, labels must lie flat with no more than
0.5 inch (13 millimeters) of curl in any direction.
•
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
To print sheets of labels, see page 44.
Transparencies
Transparencies used in the printer must be able to withstand 392° F
(200° C), the printer’s maximum temperature. Close the rear output
bin to print transparencies to the top output bin.
Caution To avoid damaging the printer, use only transparencies
recommended for use in laser printers.
If you have problems printing transparencies, use Tray 1.
To print transparencies, see page 46.