HP EliteBook 2540p Notebook PC - Manual (Page 119)

CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module, and do not bend the memory module.
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
21. Replace the memory module compartment cover (1).
22. Replace the memory module compartment cover screw (2).
Upgrading a memory module in the primary memory module slot 107