HP Integrity NonStop J-Series - Manual (Page 28)

Primary : Non-IDEL message received
Relating to function or activity: Communicating with the SPM process.
Cause: An unrecognized/irrelevant message was transmitted/ received while communicating
with the SPM process.
Effect: Communication with SPM process would not be complete and SPMON won’t work as
expected.
Recovery: N/A
WVPASAP 561
: Parser Error
Relating to function or activity: Getting all the entities configured in the EDL.
Cause: The SSG command to retrieve the entity returned with an error. Description of the error
is contained in the error number.
Effect: The data for the entity will not be displayed.
Recovery: N/A
WVPASAP 562
: :
Relating to function or activity: Communication with the SSGCOM process.
Cause: Specific cause depends on the error number.
Effect: Depending on the cause, the Terminal process may stop or data might not be refreshed.
Recovery: Depends on the cause/ error number. One way would be to stop WVP, stop any
SEEVIEW process with names $AAA and restart WVP.
WVPASAP 563
WASAP : Environment Data Not Found
Relating to function or activity: Retrieving a system’s configured environment’s data
Cause: Occurs if the specified environment’s data could not be fetched or if the environment
does not exist anymore.
Effect: Data for that particular environment cannot be displayed.
Recovery: Reconfigure the environment to make sure it is running.
WVPASAP 564
WASAP : Entity Data Not Found
Relating to function or activity: Retrieving an environment’s configured entities data.
Cause: If a particular entity listed in an environment could not return data due to removal of
that entity from that environment.
Effect: Data for that particular entity cannot be displayed.
Recovery: Reconfigure the environment to make sure the entity is included.
Web ViewPoint ASAP User Guide – 528941-003
28