HP Integrity NonStop J-Series - Manual (Page 27)

Effect: TERMMAN will shutdown and terminals to issue SSG commands will not be available for
SPMON and WASAP processes.
Recovery: Restart WASAP
WVPASAP 556
TM Primary SSGCheck: Failed Security Setting for ASAP. WASAP will function only for user that
started Web ViewPoint.
Relating to function or activity: SSG SECURE command issued by the TERMMAN process to
configure ASAP for use by all users.
Cause: Security permissions don’t permit ASAP to be used by all the users.
Effect: WASAP will only be accessible to the user that started WVP.
Recovery: N/A
WVPASAP 557
: No Term Error.
Relating to function or activity: Requesting Terminal information from SSG
Cause: Terminal information from SSG could not be retrieved. Possible reasons could be
security permissions if the Terminal is already being used by another user/process or if the
Terminal process is not present on the system.
Effect: The Terminal process will be stopped and WASAP data would not be refreshed.
Recovery: Depending on the cause. One way would be to stop WVP, stop any SEEVIEW
process with names $AAA and restart WVP
WVPASAP 558
SPM StartManager: Failed to open TM
Relating to function or activity: Opening the Terminal Manager process.
Cause: An existing terminal manager process could not be opened. The error number identifies
the exact cause of this problem.
Effect: The Terminal process will be stopped and WASAP data would not be refreshed.
Recovery: Depending on the cause. One way would be to restart WVP
WVPASAP 559
: EDL/Environment error.
Relating to function or activity: Parsing the EDL or Environment to display data.
Cause: Cannot get the EDL or Environment information as specified, from the Terminal
Effect: The data will not be displayed on the WASAP screen for the affected environment.
Recovery: N/A
WVPASAP 560
Web ViewPoint ASAP User Guide – 528941-003
27