HP Integrity NonStop J-Series - Manual (Page 11)

1.2.2. Using DSM/SCM or Manual Installation
Web View Point ASAP can be installed using DSM/SCM tool or can be
installed manually also.
1. For DSM/SCM, use the IPSETUP.exe program to upload the files from the CD / PC
to the NonStop server. Follow the screens on the Wizard and provide the necessary
information as prompted. Once the IPSETUP program completes ensure that the
files listed below have been transferred in the correct format and the file codes are
correct.
2. Following are the steps needed to install Web ViewPoint ASAP Manually:
The Web ViewPoint ASAP installer consists of the following files:
 README.TXT File containing product and basic installation information.
 INSTWASP OBEY file to install Web ViewPoint ASAP.
 INSWASAP Program to add Web ViewPoint ASAP plug-in into Web
ViewPoint.
 MAKEDCNF Script file used to create DISPCONF file
 SHUTWAS
Program to manage shutdown of Web ViewPoint ASAP.
 SPMON
Program handling state propagation management.
 TERMMAN Program to perform terminal management and store state
propagation
 UIWASAP
Program to remove Web ViewPoint ASAP plug-in from Web
ViewPoint (when installed by manual procedure).
 WASAP Program handling the main web component of Web ViewPoint
ASAP.
 WSATMPAK Template file for ASAP.
 WASPEVTS Program to install ASAP BAM content to WVP BAM
Instructions:
1. FTP the following files to $system.zwas.
(Note: You may FTP the files under a different $volume.subvolume)
The following files have to be transferred in 'BINARY' Mode
 INSWASAP
 SHUTWAS
 SPMON
 TERMMAN
 UIWASAP
Web ViewPoint ASAP User Guide – 528941-003
11