HP LaserJet 1020 Plus Printer - Manual (Page 69)

Printer curled the media
● See Curl or wave on page 66 for more information.
● See Media paths on page 6 or Choosing paper and other media on page 22 for more information.
Print job is extremely slow
The maximum speed of the printer is up to 14 ppm for A4 media and 15 ppm for letter media for the
HP LaserJet 1020 printer. Your print job might be very complex. Try the following:
● Reduce the complexity of your document (for example, reduce the number of multiple graphics).
● Access the printer properties in the printer driver. See Printer properties (driver) on page 8 for
instructions. Set the media type to plain paper.
NOTE: This may cause toner to fuse improperly if you are using heavy media.
● Narrow media or heavy media will slow printing. Use normal media.
● Print speed is based on computer processor speed, the amount of memory, and the amount of
hard disk space available on your computer. Try increasing these components.
Return to Finding the solution on page 54 .
ENWW Paper handling problems 59