HP SAN Virtualization Services Platform - Manual (Page 41)

CreateRemoteSnapcloneGroup command
Syntax
CreateRemoteSnapcloneGroup -SCGroup SCGroupName, ~
-task SnapcloneTaskName, ~
-Domain DestinationVSMDomainName, -Priority 1|2|3, ~
-VirtualDisk SourceVirtualDiskName, ~
-Destination DestinationVirtualDisk, -StoragePool PoolName, ~
-Thin 0|1, -timeout 900
Description
Creates a remote snapclone group with one task over a single virtual disk. This command creates a
remote SVSP domain snapclone group.
The Priority argument has no significance, and should be treated as optional.
CreateSnapcloneGroup command
Syntax
CreateSnapcloneGroup -Group GroupName, -VirtualDisk SourceName, ~
-task TaskName1 _priority 1|2|3 ~
_StoragePool PoolName1 _host HostName1 ~
_permission RW|OFF [_thin 0|1], ~
[-task TaskName2 _priority 1|2|3 ~
_StoragePool PoolName2 _host HostName2 ~
_permission RW|OFF [_thin 0|1], ] ~
-timeout 900
Description
Creates a snapclone group. If there is no host to receive permissions for a task, enter a dummy (existing
or non-existing) host name with permissions set to OFF.
NOTE:
If a failure occurs for any task on the list, the command stops executing (it does not process the rest
of the list).
Priorities: 1—High; 2—Medium; 3—Low
CreateVDGSnapcloneGroup command
Syntax
CreateVDGSnapcloneGroup -SCGroup SCGroupName, ~
-task SnapcloneTaskName, ~
-SourceVDG SourceVDGroupName, ~
-DestinationVDG DestinationVDGroupName, ~
-Domain DestinationDomainName, -Priority 1|2|3, ~
[-host HostName1 RW|OFF,] ~
-VirtualDisk SourceVirtualDisk _Destination DestinationVirtualDisk ~
HP StorageWorks SAN Virtualization Services Platform Manager command line interface user
guide 41