HP Integrity NonStop J-Series - Manual (Page 39)

Configuring the ELMM Server on the NonStop
System
Entry Level Media Manager Installation and User’s Guide— 694639-001
3- 15
Running the Server Processes on the NonStop
System
Running the Server Processes on the NonStop System
Once ELMM has been configured on the HP NonStop system, the server processes
need to be started before connecting to the robot using the GUI.
1. At the TACL prompt, type OBEY START as shown in Figure 3-14 .
Figure 3-14. OBEY START
Note. In order for the processes to start, they have to be in the correct location on the
server. The correct location is where the files were transferred to using the FTP utility
(see
Figure 2-13 on page 2-12 ). To edit the location, use the EDIT tool.