HP Integrity NonStop J-Series - Manual (Page 26)

Configuring the ELMM Server on the NonStop
System
Entry Level Media Manager Installation and User’s Guide— 694639-001
3 -2
Configuring the ELMM Server on the NonStop
System
Configuring the ELMM Server on the NonStop
System
1. Type RUN CONFIG at the TACL prompt on the system where ELMM is installed.
2. Type a password and press Enter.
A menu scrolls up with configuration options. Figure 3-1 shows the Configuration
menu.
Note. The file TSIMMSP is created after the password is entered. If you ever forget your
password, purge this file and create a new password. A new TSIMMSP file will then be
created.
Figure 3-1. Configuration Main Menu