HP Integrity NonStop J-Series - Manual (Page 38)

Configuring the ELMM Server on the NonStop
System
Entry Level Media Manager Installation and User’s Guide— 694639-001
3- 14
Testing Communication Between the NonStop
Server and the ACL
Testing Communication Between the NonStop Server and the
ACL
1. Logon with a super group ID at the TACL prompt where ELMM is installed.
2. Volume over to the location where the Server files were transferred.
3. Type RUN TPTSTR and the SCSI name of the ACL (in this example the SCSI
name is $M8701A) at the TACL prompt (See Figure 3-13 ).
Note. TPTSTR is a test to see if the ACL is communicating with the server.
Figure 3-13. RUN TPTSTR