HP Linux Server Management Software - Manual (Page 32)

Toolkit utilities 32
CONREP return codes
Value Meaning
0 The command was completed successfully.
1 The hardware definition data file (conrep.xml) is corrupt or not found.
2 The system configuration data file (conrep.dat) is corrupt or not found.
4 The system administrator password is set. The settings cannot be changed unless this
password is cleared.
5 The XML hardware definition file (conrep.xml) is corrupt or not appropriate for the current
platform.
CONREP screen output
A typical screen output generated by CONREP is similar to the following:
conrep 3.00 3.10 - SmartStart Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2010 Hewlett-Packard Development Company, L.P.
System Type: ProLiant DL360 G4
ROM Date: 08/16/2005
ROM Family: P52
XML System Configuration: conrep.xml
Hardware Configuration: demo.dat
File contains global platform restrictions
Global Restriction: [minimumconrepversion] OK
Platform check:
[ProLiant DL3] match
[ProLiant DL5] no match
Saving configuration data to demo.dat.
CONREP Return code: 0
CONREP -s (Store to Data file) Example usage for HP ProLiant 100
series servers
To extract the BIOS settings from an SL160z G6 server and save the configuration to an "sl160zconrep.dat"
data file:
[root@ilo002481b08134 conrep]# ./conrep -s -xconrepSL160zg6_20090728.xml
-fsl160zconrep.dat
conrep 3.00 - SmartStart Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2009 Hewlett-Packard Development Company, L.P.
System Type: ProLiant SL160z G6
ROM Date : 07/28/2009
ROM Family : O33