HP Officejet g55 All-in-One Printer - Manual (Page 26)

22 Chapter 5—Load paper or transparency film, or load originals
HP OfficeJet G Series
Set the paper type
After you have loaded paper or film in the unit, tell it what type of paper is loaded.
Change this setting whenever you change the type of paper or film.
The paper types you specify for copying are independent of the paper types you specify
for printing.
For more information, see “Recommended paper-type settings for copying” or
“Recommended paper-type settings for printing” in the Onscreen Guide.
To do this for future copy jobs
Choose one of the following:
•
On the front panel, press Paper Type. Press X (>) until the appropriate type
appears. Press ENTER to choose the displayed paper size.
• In the Director, click Settings, and choose Copy Settings. The Settings tab
appears. In the Paper Type area, choose the appropriate type, and then click Save
Configuration.
To do this for a print job
Choose one of the following:
•
To do this for future print jobs, go to the Director, click Settings, and then choose
Print Settings. The Setup tab appears. From the Paper Type list, choose the
appropriate type, and click OK.
• To do this for the current print job, open the document that you want to print. From
the File menu, choose Print, Print Setup, or Page Setup. Make sure that the
selected printer is HP OfficeJet G Series, and then click Properties, Options,
Printer Setup, or Printer. The Setup tab appears. From the Paper Type list,
choose the appropriate type, and then click OK.
AvPrn.book Page 22 Monday, February 28, 2000 11:13 AM