HP Server tc3100 series - Manual (Page 61)

A Event Codes
The table below describes the event codes that can be listed in the event log and
optionally directed to specified users via e-mail or pager. When the HP Server
Remote Management Card sends notification about a server event, it includes the
server identifying number and a five-digit code identifying the event. (If you use
email or a TAP pager, you will receive the server name and some descriptive text
as well.)
Note that Server Agents software will need to be loaded on your server in order to
receive an event notification for most of the events listed below. Refer to the HP
Server SNMP agents documentation (viewable via the HP Server Documentation
CD-ROM) for agent installation and configuration instructions. Refer to the
Readme file for Agents software located on the HP Netserver Navigator CD
under manage\server.
NOTE It's a good idea to copy appropriate sections of this table and
keep it with the pager you use to receive notifications. A
regularly updated list of HP supported event codes is available
on the hp site at:
http://www.hp.com , under the Server
Troubleshooting section under Technical Support.
Notification and log messages are limited to a length of 40 characters.
Pager
Code
Server Event
Severity
001XX Temperature sensor crossed lower non-critical threshold WARNING
001XX Temperature sensor crossed lower critical threshold CRITICAL
001XX Temperature sensor crossed lower non-recoverable threshold CRITICAL
001XX A temperature inside the server has gone outside the factory
specified range. WARNING
001XX A temperature inside the server has gone far outside the factory
specified range. CRITICAL
001XX Temperature sensor crossed upper non-recoverable threshold CRITICAL
00261 VRM failure CRITICAL
002XX A measured voltage in the server has gone outside the factory
specified lower voltage range. WARNING
002XX A measured voltage in the server has gone far outside the factory
specified lower voltage range. CRITICAL
55