HP Server tc3100 series - Manual (Page 39)

5 Using the Remote Management
Card Web Interface
After you've installed, cabled, and configured the HP Server Remote Management
Card using the card's BIOS setup program, you are ready to set options for the HP
Server Remote Management Card using the Remote Management Card's
management software.
Using your web browser you can remotely set all card options including:
•
Setting up an administrator list (up to 16) for system access and
notification
• Configuring event management operations, including the enabling of
paging and e-mail notification
• Configuring serial communications for external modem
• Configuring LAN access
CAUTION Configuring LAN access during a remote connection is not
recommended. Changing your LAN access settings while
logged on could terminate your connection.
• Viewing a log of server events and PCI utilization
•
Viewing current measurement sensors
• Viewing server screens
• Running memory diagnostics on the server
• Performing remote firmware or BIOS updates
•
Remotely power on, power off, power cycle, or reset the server
Logging In to the HP Server Remote Management
Card
To initiate a connection to the HP Server Remote Management Card from the
remote client, connect to the HP Server Remote Management Card via LAN or
modem connection, as follows:
33