HP XP7 Storage - Manual (Page 131)

P9500 XP7 IBM 3990 6E Feature
32,768 65,280 64 Maximum pairs
8 per logical control unit 8 per logical control unit 4 Maximum paths between
storage systems
Default is 4 per CU. Requires
Remote Web Console to Default is 4 per CU. Requires
Remote Web Console to 4 Number of copy operations on
initial copy
change value in range from 1
to 16. change value in range from 1
to 16.
Requires main storage system
port to be set to target by Requires main storage system
port to be set to target by No Dedicated interface between
storage systems
Remote Web Console (or SVP) Remote Web Console (or SVP)
or automatically in response to or automatically in response to
establish and delete path
commands. establish and delete path
commands.
3 or 15, default = 15 tracks 3 or 15, default = 15 tracks 1-255, default is 15 (setting of
1 copies a maximum of 3 PACE parameter initial copy
option
tracks at a time, 2-255 copies
a maximum of 15 tracks at a
time)
S-VOL Data Never – Default
S-VOL Status S-VOL Data Never – Default
S-VOL Status Yes No – Default CRITICAL pair error options
(Fence Level parameter)
FREEZE/RUN by logical
controller SSID pair. FREEZE/RUN by logical
controller SSID pair. FREEZE/RUN by logical
controller SSID pair CGROUP
Supported. Supported. Supported CQUERY
Cnt Ac-S Z Unique Features specified using Remote Web Console or SVP only
RCU Options
Default = 1. If the minimum
number of MCU-RCU active Default = 1. If the minimum
number of MCU-RCU active Not supported Minimum paths
paths falls below this value, all paths falls below this value, all
pairs will be split based on the
Fence Level option in effect. pairs will be split based on the
Fence Level option in effect.
CU Options
Default = YES - PPRC
supported, optional capability Default = YES - PPRC
supported, optional capability Host must support PPRC PPRC support by host
to allow host support for non to allow host support for non
PPRC capable operating
systems. PPRC capable operating
systems.
To any host or only to RCU host To any host or only to RCU host Not supported per IBM doc
Planning for IBM Remote Copy
(SG24-2594-009 p.184) RCU-to-MCU SIM reporting
Default = Not report; Designed
for non-MVS operating systems Default = Not report; Designed
for non-MVS operating systems Not supported per IBM doc
Planning for IBM Remote Copy
(SG24-2594-009 p.184) RCU to MCU service SIM
reporting
that do not support SIM
reporting. that do not support SIM
reporting.
Pair Options
Optional to S-VOL, default =
P-VOL Optional to S-VOL, default =
P-VOL Not supported Cache fast write data
256 per CU 256 per CU 256 per storage system Max. volumes
Per IBM doc Per IBM doc Per IBM doc SIM/error messages
FICON FICON Parallel or ESCON Local storage system interface
IEA494I and IEA491E console messages 131