Communication options, Usb port – HP Tower Uninterruptible Power System User Manual
Page 21
ADDITIONAL UPS FEATURES
HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide
S 505922-002
14
Table 1
DIP Switch Settings
100V Models
Output Voltage
Outnput Voltage Range
DIP Switch 1
DIP Switch 2
100V
90–106V
ON
ON
120V Models
Output Voltage
Output Voltage Range
DIP Switch 1
DIP Switch 2
110V
99–116V
ON
OFF
120V*
108–127V*
OFF
OFF or ON
230V Models
Output Voltage
Output Voltage Range
DIP Switch 1
DIP Switch 2
220V
198–233V
ON
OFF
230V*
207–243V*
OFF
OFF or ON
240V
216–254V
ON
ON
*
Default position
Communication Options
The UPS is equipped with a USB port and a serial port. Either the USB port or the serial
port may be used to monitor the UPS; however, they cannot operate simultaneously.
USB Port
The UPS can communicate with a USB-compliant computer using HP Power Manager
software.
To establish communication between the UPS and a computer:
1
Connect the USB cable to the USB port on the UPS rear panel.
Connect the other end of the USB cable to the USB port on your computer.
USB Port
Figure 15
The USB Port
2
Install the HP Power Manager software according to the instructions provided with
the software.