HP Compaq t5720 Thin Client - Manual (Page 32)

HP Sygate Security Agent User Guide
Protocol
Specifies a protocol for the rule.
All Protocols
Applies to all protocols on all ports, for both incoming and outgoing traffic.
TCP
Displays two more list boxes in which you can specify which ports (remote and/or local)
should be affected by the rule. You can type the port numbers or select the port type from
the list boxes for the both local and remote ports.
If you do not enter or select a port number, then all ports will be affected by the rule. If you
enter a port number for the local port entry, but not for the remote port entry, then the local
port you entered and ALL remote ports will be affected by the rule.
Then, select which traffic direction should be affected by the rule.
UDP
Displays two port list boxes. You can type the port numbers or select the port type from the
list boxes for both local and remote ports. If you do not enter or select a port number, then
22