HP XP Array Manager Software - Manual (Page 23)

Preparing for Cache Manager Operations 3-3
Hitachi Cache Manager User’s Guide
Note: DCRT is an alias of HRUDCRT. You can invoke Cache Manager in TSO by
specifying either HRUDCRT or DCRT as the program name. One issue reported
with using DCRT, however, is a missing file for online help. If your installation
CD is missing the DCRT help file, avoid using the DCRT alias, or contact HDS
for the DCRT help file.
HRUDCRX must be registered as authorized libraries, as follows:
1. Register in SYS1.PARMLIB(IKJTSOxx).
2. Add HRUDCRT and the alias DCRT as AUTHCMD NAMES.
3. Add HRUDCRX as AUTHPGM NAMES.
If you are not using IKJTSOxx:
1. Specify the authorized command and authorized program by using CSECT
IKJEFTE2 or IKJEFTE8.
2. To update, assemble them, then reassemble them to link them with load
module IKJTABLS in SYS1.LPALIB, then re-IPL the system.
Figure 3-2 illustrates the registration process using TSO commands:
AUTHCMD NAMES( +
DCRT HRUDCRT +
:
:
)
AUTHPGM NAMES( +
HRUDCRX +
:
:
)
Figure 3-2 Registering HRUDCRT and HRUDCRX