HP Intelligent Infrastructure Analyzer Software User Manual
Page 6
Table 1 System requirements for HP IIAS management station
Supported platforms, versions, or configuration
Hardware and software
Dual-core 2.0 GHz CPU or better
CPU
4 Gb or higher
RAM
250 MB
NOTE:
Minimum 250 MB disk space is required on the drive where TEMP
folder is located.
Product installation disk space
requirements
300 - 350 MB
Minimum disk space requirement
NOTE:
Disk space will increase depending on the SAN size.
Version 8.0, 9.0, or 10.0 (compatibility view only).
Internet Explorer
HP IIAS v2.0 does not work on Windows Server 2012 with KB2846071 service
pack . KB2846071 service pack has a session management issue. Please see
for more details.
NOTE:
To enable compatibility view on IE10:
•
In IE, go to Tools menu, click Compatibility View Settings .
•
Select the Display all websites in Compatibility mode check box.
See
“Installing OS specific service packs for supported platforms and service
.
Windows
HP IIAS supports IPv4 only. The host where HP IIAS is installed must have IPv4
address.
IP network addresses
Virtual or Physical.
Host Type
NOTE:
•
The host on which HP IIAS is installed should be able to connect to the components in the
active profile over Ethernet always.
•
Following are the default TCP/IP ports used by HP IIAS:
8080, 8085, 9000, 9001, 5678, 8765
If these ports are used by another application, then the HP IIAS installer prompts to enter the
free ports that can be used.
6
Overview