HP ProLiant BL480c Server-Blade - Manual (Page 71)

Troubleshooting 71
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1
"Management agents (on page 53 )" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website ( http://www.hp.com/support )
2 • "Integrated Management Log" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
HP website ( http://www.hp.com/support )
• "Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
3 "Component identification (on page 6 )"
4 System Management Homepage ( https://localhost:2381 )
5 "Power-on problems flowchart (" Server blade power-on problems
flowchart " on page 65 )"
6 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
• Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )
• "HP contact information (on page 82 )"
7 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
• Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
( http://www.hp.com/go/bladesystem/documentation )