HP ProLiant BL480c Server-Blade - Manual (Page 25)

Hardware options installation 25
2. Prepare the hard drive.
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug hard drive LEDs (" SAS and SATA hard drive
LEDs " on page 8 ).
5. Resume normal server blade operations.
Processor option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: To avoid damage to the processor: