HP ProLiant BL480c Server-Blade - Manual (Page 23)

Setup 23
c. Install the second blank onto the tabs on the coupler plate, and then slide the second blank back
until it locks into place.
10. Install the full-height blank into the device bay.
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
( http://www.hp.com/go/bladesystem/interconnects ).
Completing the configuration
To complete the server blade and HP BladeSystem configuration, see the overview card that ships with the
enclosure.