beautypg.com

HP ProLiant xw460c Blade Workstation User Manual

Page 22

background image

Hardware options installation 22

Handle the processor only by the edges.

Do not touch the bottom of the processor, especially the contact area.

CAUTION: To prevent possible server malfunction and damage to the equipment, multiprocessor

configurations must contain processors with the same part number.

CAUTION: To prevent possible server blade overheating, always populate processor socket 2 with a

processor and a heatsink or a processor cover and a heatsink blank.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the heatsink is

removed from the processor after it has been installed.

IMPORTANT: When installing the heatsink, align the guide pins on the processor retention bracket with

the alignment holes in the heatsink.

IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the server

blade does not power up.

NOTE: Do not discard the processor protective cover. Always install the processor protective cover if the

processor is removed from the socket.

To install the component:

1.

Power down the server blade (on page

13

).

2.

Remove the server blade (on page

14

).

3.

Remove the access panel (on page

14

).

4.

Remove all hard drives ("

Hard drive option

" on page

20

).

5.

Remove the hard drive backplane.

This manual is related to the following products: