HP Integrity NonStop H-Series - Manual (Page 37)

and if an EMS message needs to be written. If the “Write to EMS” action is
checked, then whenever a particular condition has been met, an EMS message
is generated under the Web ViewPoint Pathway SubSystem ZWPY – WVPPWY
(i.e. SSID #261).
To Edit a Predefined Setup:
After a Setup has been defined, the user will see all the defined Setups in the
Select box named “Defined Setups”. Clicking on any setup will automatically fill
up the form with the setup information, and the user can then make changes to
the Setup definition/action. Clicking on the Submit button will Save the Setup
configuration.
To remove a Setup:
Select a predefined Setup from the list of “Defined Setups”, and click on the
Remove button to remove the Setup.
Note: In order for the Auto Manage to work, the Auto Manage program
(WVPPCTRL) must be running on the host in the background. When Web
ViewPoint Pathway is installed, the Auto Manage program starts along with Web
ViewPoint during its startup and continuously monitors Pathways as necessary.
Back to top
Web ViewPoint Pathway Plug-in User Guide – 528942-003
37