HP Integrity NonStop H-Series - Manual (Page 12)

Steps:
1. FTP the following files to $system.zwpy.
(Note: You may FTP the files under a different $volume.subvolume)
The following files have to be transferred in 'BINARY' Mode
 REMOVPLG
 SETUPPLG
 WVPPADM
 WVPPCTRL
 WVPPUSER
 WVPPREF
 WPWTMPAK
The following files have to be transferred in 'ASCII' Mode
 INSTWVPP
 MAKEWPY
2. Obey the Install file ‘INSTWVPP’ (read the following instructions first)
2.1. Set your working volume to $system.zwpy (or to
$volume.subvolume where you have transferred the files)
2.2. Issue ‘OBEY INSTWVPP’
Note: Web ViewPoint Pathway Version 1 generates a limited set of EMS
events under SubSystem ID ZWPY (SSID#261).
Requiring your input, this performs the following:
a. Sets the file codes
b. Sets the security of all the files to 'NUNU'
c. FUP Obeys MAKEWPY. This creates the necessary Web ViewPoint
Pathway data files.
d. Starts the SETUPPLG program. This program requests the following
from the user and updates the Web ViewPoint configuration to add
Web ViewPoint Pathway as a plug-in:
d.1. Web ViewPoint Location: This is the location
($volume.subvolume) where Web ViewPoint is installed.
d.2. Port numbers to use for Administration and User functions:
These are two unused TCP port numbers needed for running
the Administration and User functions.
d.3. Name of the Auto-Manage Process: This is the process name
of the Auto-Manage Program (WVPPCTRL). This process starts
alongside Web ViewPoint Pathway and will be a part of
Web ViewPoint Pathway Plug-in User Guide – 528942-003
12