HP Integrity NonStop H-Series - Manual (Page 186)

C Installing TN6530 on a Sun Workstation
This appendix provides instructions for installing the TN6530 program on your Sun workstation.
To install TN6530, you transfer files from a NonStop system to your Sun workstation. Follow these
steps:
1.
Log in as the user named root. You must have system administrator privileges.
2. Run the FTP client on your system and establish a connection with a NonStop host system. For
example, to connect to a NonStop host named tandhost, enter the following command:
# ftp tandhost
3. Issue the cd command to change to the subvolume $system.ztcpip:
ftp> cd $system.ztcpip
4. Issue the get command to copy the file map6530 from the NonStop system to your workstation
as /etc/map6530:
ftp> get map6530 /etc/map6530
5. Change to binary mode:
ftp> bin
6. Issue the get command to copy the program file from the NonStop system to your workstation
as /usr/ucb/tn6530. The name of the program file you copy depends on the type of
workstation you are using.
Table 23 lists the program files according to workstation type.
For example, the file name for one Sun/3 workstation is tn6530s3:
ftp> get tn6530s3 /usr/ucb/tn6530
NOTE: You must name the new file tn6530. If you try to run the program by any other name,
you cannot use 653X block mode functions.
7. Disconnect from the NonStop system and exit the FTP client program:
ftp> quit
8. Change the tn6530 file into an executable file:
# chmod a+x /usr/ucb/tn6530
If you want to change the functionality of any keys, you can modify the /etc/map6530 file as
described in Appendix A, Keyboard Mapping for TN6530.
Table 23 TN6530 Program Files for Sun Workstations
Sun Workstation Model Sun Operating System Version Program File
Sun 3 SUNOS 4.0.3 SUN3OS4 *
SUN 4 (SPARCSTATION) SUNOS 4.1.1 SUN4OS4
Sun 386i SUNOS 4.0.1 SUNIOS4
* Does not operate on SUNOS 3.4
Operating System
186 Installing TN6530 on a Sun Workstation