HP Integrity NonStop H-Series - Manual (Page 145)

Table 17 Sun Workstation and 653X Keys (continued)
Sun Keyboard 653X Keyboard Function
R7 HOME Cursor home
R11 SHIFT/HOME Cursor home down
R5 CTRL/HOME Cursor to after last data
R3 SHIFT/RETURN Cursor to beginning of line
R6 CTRL/RETURN Cursor to end of line
R1 ROLL UP Roll up one line
R4 ROLL DOWN Roll down one line
R15 NEXT PAGE Next page
R9 PREV PAGE Previous page
F7 CLR-TAB-SET Set tab
F8 SHIFT/CLR-TAB-SET Clear tab
F9 CTRL/SHIFT/CLR-TAB-SET Clear all tabs
TAB BACK TAB-TAB Horizontal tab
LEFT/RIGHT + TAB SHIFT/BACK TAB-TAB Back tab
LEFT/RIGHT + I CHAR INS Insert character
SHIFT + LEFT/RIGHT + I DEL-LINE-INS Insert line
LEFT/RIGHT + O CHAR DEL Delete character
SHIFT + LEFT/RIGHT + O SHIFT/DEL-LINE-INS Delete line
R2 SHIFT/CHAR INS Insert mode
LEFT/RIGHT + L CTRL/PAGE-ERASE-LINE Erase to end of line
SHIFT + LEFT/RIGHT + L CTRL/SHIFT/PAGE-ERASE-LINE Erase to end of page
CTRL + C BREAK Break character
CTRL + LEFT/RIGHT + SHIFT/RESET Soft reset
CTRL + ] + Q Exit emulator
CTRL + ] + z Suspend emulator
You can perform a soft reset to clear all buffers and cancel any pending function key processing
and I/O operations. Soft reset also turns off insert character mode, clears all error conditions and
messages, and enables the keyboard. The action in response to pressing these keys depends on
whether you are working in conversational mode or block mode. For more information, see
“Working in Conversational Mode” (page 148) and “ “Working in Block Mode” (page 148) .
NOTE: Some Sun workstation applications may have assigned functions to the keys which may
be different from the functions in the keyboard map file, or may have assigned different scan codes
to specific keys. To use such applications, you may have to alter the entries in the map6530 file.
“Cross-Reference Key Chart” (page 143) lists 653X functions that are not supported by TN6530
(they do not have an equivalent workstation key).
Cross-Reference Key Chart 145