beautypg.com

HP StoreEver Rack-mount Kits User Manual

Page 16

background image

1.

Remove the pins and threaded plates from both ends of each outer rack rail. These pieces
will not be used.

Figure 20 Removing the pins and threaded plates

NOTE:

The ends of the rack rails are marked FRONT and REAR for proper orientation.

2.

Attach the front mounting plate of each outer rail to the rack using four 10-32 screws in the
previously marked holes in the front vertical mounting columns of the rack.

Figure 21 Attaching the front mounting plate

16

1U Rack Installation