ADT Security Services PremisePro none User Manual
Page 9
I n tr o d u c t i o n : R e m o t e M o n i t o r i n g
5
Remote
Monitoring
This system can send alarms, troubles and emergency messages over telephone lines to a
central station (this must be enabled by your installer). If you accidentally initiate an alarm,
immediately call the central station to prevent an unnecessary response.
By default, an alarm transmission can be cancelled by entering a valid access code within 30
seconds of the alarm.
Maintenance
With normal use, the system requires minimum maintenance. Note the following points:
1. Do not wash the security equipment with a wet cloth. Light dusting with a slightly
moistened cloth should remove normal accumulations of dust.
2. Use the system test described in “Testing Your System” on page 16 to check the battery
condition. We recommend, however, that the standby batteries be replaced every 3 years.
3. For other system devices such as passive infrared, ultrasonic or microwave motion detec-
tors or glassbreak detectors, consult the manufacturer’s literature for testing and main-
tenance instructions.