HP OmniBook 7100 Notebook PC - Manual (Page 9)

Using OmniBook Plug-In Modules
9WMRK XLI '(631 *PSTT] (VMZI
1-9
Using the CD-ROM / Floppy Drive
You can install the CD-ROM / floppy drive module in the plug-in module bay. This
module combines both a CD-ROM and a floppy drive, which can be used
simultaneously.
This section describes how to
•
Insert or remove a CD.
•
Open the CD-ROM drive manually.
•
Insert or eject a floppy disk.
To insert or remove a CD
' % 9 8 - 3 2 (S RSX MRWIVX SV VIQSZI E '( [LMPI XLI 3QRM&SSO MW EGXMZIP] VIEHMRK HEXE
3XLIV[MWI XLI 3QRM&SSO GSYPH WXST VIWTSRHMRK ERH ]SY GSYPH PSWI HEXE
1. Press the button on the face of the CD-ROM drive. If you are using this drive for
the first time, be sure to remove the cardboard packing insert if it is present.
2. Place the CD into the drive (label facing up) and gently press down to seat the
CD on the spindle—or—remove the CD.
3. Slide the CD-ROM tray back into the module to close it.